Determination,residue and risk assessment of trifloxystrobin,trifloxystrobin acid and tebuconazole in Chinese rice consumption

A simple and rapid analytical method for the detection of trifloxystrobin, trifloxystrobin acid and tebuconazole in soil, brown rice, paddy plants and rice hulls was established and validated by liquid chromatography with tandem mass spectrometry. Acceptable linearity (R² > 0.99), accuracy (average recoveries of 74.3–108.5%) and precision (intra- and inter-day relative standard deviations of 0.9–8.8%) were obtained using the developed determination approach. In the field trial, the half-lives of trifloxystrobin and tebuconazole in paddy plants were 5.7–8.3 days in three locations throughout China, and the terminal residue concentrations of trifloxystrobin and tebuconazole were <100 and 500 μg/kg (maximum residue limits set by China), respectively, at harvest, which indicated that, based on the recommended application procedure, trifloxystrobin and tebuconazole are safe for use on rice. The risk assessment results demonstrated that, owing to risk quotient values of both fungicides being <100%, the potential risk of trifloxystrobin and tebuconazole on rice was acceptable for Chinese consumers. These data could provide supporting information for the proper use and safety evaluation of trifloxystrobin and tebuconazole in rice.     

Fabrication and characterization of cellulose nanoparticles from maize stalk pith via ultrasonic-mediated cationic etherification

In this study, parenchyma cellulose, which was extracted from maize stalk pith as an abundant source of agricultural residues, was applied for preparing cellulose nanoparticles (CNPs) via an ultrasound-assisted etherification and a subsequent sonication process. The ultrasonic-assisted treatment greatly improved the modification of the pith cellulose with glycidyltrimethylammonium chloride, leading to a partial increase in the dissolubility of the as-obtained product and thus disintegration of sheet-like cellulose into nanoparticles. While the formation of CNPs by ultrasonication was largely dependent on the cellulose consistency in the cationic-modified system. Under the condition of 25% cellulose consistency, the longer sono-treated duration yielded a more stable and dispersible suspension of CNP due to its higher zeta potential. Degree of substitution and FT-IR analyses indicated that quaternary ammonium salts were grafted onto hydroxyl groups of cellulose chain. SEM and TEM images exhibited the CNP to have spherical morphology with an average dimeter from 15 to 55 nm. XRD investigation revealed that CNPs consisted mainly of a crystalline cellulose Ι structure, and they had a lower crystallinity than the starting cellulose. Moreover, thermogravimetric results illustrated the thermal resistance of the CNPs was lower than the pith cellulose. The optimal CNP with highly cationic charges, good stability and acceptable thermostability might be considered as one of the alternatively renewable reinforcement additives for nanocomposite production.     

Analyses of reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems using recently developed thermodynamic rate equations

This article presents reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems and regression analyses using recently developed thermodynamic rate equations that contain electrostatic and solvent-solute terms. The isomole fraction plots for these reaction systems are linear, and previous theoretical work has shown that the electrostatic term is negligible for such systems. On the other hand, the reaction rates are dependent upon the cosolvent mole fraction, indicating that the solvent-solute term, which is modeled empirically, is significant. The results of the analyses provide the foundation for a paradigm shift away from the emphasis on electrostatic effects to more tenable explanations of kinetic behavior in solvent systems.     

Cooperative effect of Fe and Ti species over Fe–Ti–Ox catalysts on the catalytic hydrolysis performance of hydrogen cyanide

FeO_x, TiO₂, and Fe–Ti–O_x catalysts were synthesized and used in the catalytic hydrolysis of hydrogen cyanide (HCN). Nearly 100% HCN conversion was achieved at 250 °C over the Fe–Ti–O_x catalyst. TiO₂ rutile was detected over TiO₂, but not over Fe–Ti–O_x, which suggested that the interaction between Fe and Ti species could inhibit the TiO₂ phase transition. Furthermore, the interaction between Fe and Ti species over Fe–Ti–O_x could promote the selectivity of NH₃ and CO. The mechanism of hydrolysis of HCN over FeO_x, TiO₂, and Fe–Ti–O_x can be given as follows: HCN + H₂O → methanamide → ammonium formate → formic acid → H₂O + CO.     

Dissipation of chlortetracycline in the aquatic environment: Characterization in terms of a generalized multiphase pseudo–zero-order rate law

The kinetics of the dissipation of chlortetracycline in the aquatic environment was studied over a period of 90 days using microcosm experiments and distilled water controls. The distilled water control experiments, carried out under dark conditions as well as exposed to natural sunlight, exhibited biphasic linear rates of dissipation. The microcosm experiments exhibited triphasic linear rates of degradation both in the water phase (2.7 × 10⁻², 7 × 10⁻³, 1.3 × 10⁻³ μg g⁻¹ day^–1) and the sediment phase (3.4 × 10⁻², 6 × 10⁻³, 1 × 10⁻³ μg g⁻¹ day^–1). The initial slow rate of dissipation in the dark control (3 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation and hydrolysis, whereas the subsequent fast rate (1.8 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and microbial degradation. For the sunlight-exposed control, the initial slow rate of dissipation (1.5 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and photolysis, whereas the subsequent fast rate was attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation (5.1 × 10⁻³ μg g⁻¹ day^–1). The initial fast rate of dissipation in the water phase of the microcosm experiment is attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation, whereas all subsequent slow rates in the water phase and all rates of degradation in the sediment phase are attributed to microbial degradation of the colloidal and sediment particle adsorbed antibiotic. A multiphase zero-order kinetic model is presented that takes into account (a) dissipation of the antibiotic via evaporation, hydrolysis, photolysis, microbial degradation, and adsorption by colloidal and sediment particles and (b) the dependence of the dissipation rate on the concentration of the antibiotic, type and count of microorganisms, and type and concentration of colloidal particles and sediment particle adsorption sites within a given aquatic environment.     

A facile and eco-friendly approach for preparation of microkeratin and nanokeratin by ultrasound-assisted enzymatic hydrolysis

Protein is one of the most abundant natural polymeric materials, but only a few studies on nanoproteins have been conducted. In this paper, a novel approach based on ultrasound-assisted enzymatic hydrolysis was employed for the preparation of microkeratin and nanokeratin from wool. The hydrolysis system included a solution containing enzyme (esperase) and reductant (L-cysteine) and treated ultrasonically to remove the scales and amorphous regions within wool. Results showed that the reaction was most effective at 50 °C and pH 7, when incubated for 3 h, followed by sonication for 6 h. The products included spindle-shaped microkeratin (4–7 μm in diameter and 70–120 μm in length) and cone-shaped nanokeratin (50–300 nm in diameter and less than 15 μm in length). Under ultrasonic-assisted conditions, the yields of microkeratin and nanokeratin increased significantly, while the treatment time decreased. Fourier transform infrared spectroscopy (FTIR) showed that the chemical structures of microkeratin and nanokeratin did not change, compared to that of wool. X-ray diffraction (XRD) analysis showed that the microkeratin was mainly composed of α-helical structure, while the β-sheet structure was more prevalent in nanokeratin. The presented method is facile and eco-friendly, thereby paving new pathways for the preparation of microkeratin and nanokeratin.     

弹性蛋白酶生物催化酯水解的综合实验设计*

酯的水解是有机化学实验教学中的一个重要化学反应,传统的酯水解实验设计是利用酸性或碱性环境在加热的条件下进行水解,而本实验设计将酯水解与生物催化相结合,利用弹性蛋白酶的水解功能,在常温及中性环境下实现对4-三氟甲基-7-丙酰氧基香豆素的水解。该实验设计创新性地将酯水解和酶催化相结合,有利于拓展学生的知识面,培养化学生物学复合型人才。同时,生物催化反应具有反应温和、环境友好等特点,符合当代绿色化学的需求。     

Thermo‐ and pH‐sensitive triblock copolymers with tunable hydrophilic/hydrophobic properties

Polymers consisting of poly(acrylic acid) (PAA) and statistical poly[(acrylic acid)‐co‐(tert‐butylacrylate)] (P(AA‐co‐tBA)), attached to both extremities of Jeffamine® (D series based on a poly(propylene oxide) (PPO) with one amine function at each end) using atom transfer radical polymerization (ATRP) are presented in this article. An original bifunctional amide‐based macroinitiator was first elaborated from Jeffamine®. tBA polymerization was subsequently initiated from this macroinitiator. This polymerization occurs in a well‐controlled manner leading to narrow molecular weights distribution. Amphiphilic copolymers were finally obtained after complete or partial hydrolysis of the PtBA blocks into PAA. The control of the partial hydrolysis of tBA units, conducted in a concentrated HCl/tetrahydrofuran mixture, is demonstrated. The properties of the triblock copolymers were preliminary investigated in aqueous solution by absorbance, DLS measurements and SEC/MALS/DV/DRI analysis as a function of temperature and pH modifications, providing evidences of thermo‐ and pH‐sensitive self‐assembly of the copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2606–2616